TM-9-2320-283-13-P
ANTI-LOCK BRAKE SYSTEM (ABS) M915A1
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)
AUGUST 2012
TM-9-2320-283-13-P - Page 183 of 400
TM 9-2320-283-13&P
0022
0022-3
1
2
3
4
5
6
7
8
9
10
11
3
REMOVAL, SENSOR, REAR-REAR AXLE – CONTINUED
2.
Remove connector (figure 4, item 4) by cutting two wires (figure 4, item 2) on wheel sensor cable
(figure 4, item 3) just in front of wire connectors (figure 4, item 1). Cut and discard both wire
connectors (figure 4, item 1) from wires on connector (figure 4, item 4).
CAUTION
Do not move wheel sensor in mounting bracket by prying between
tone ring and head of wheel sensor. Damage to wheel sensor or tone
ring may result.
3.
Remove two locknuts (figure 4, item 5), washers (figure 4, item 6), and bolts (figure 4, item 8) from
mounting bracket (figure 4, item 7) and axle housing and brake spider (figure 4, item 11).
4.
Carefully remove mounting bracket (figure 4, item 7) and wheel sensor cable (figure 4, item 3) from
hole in axle housing and brake spider (figure 4, item 11).
Figure 4. Removing Wheel Sensor and Mounting Bracket from Rear-Rear Axle.
Back to Top
