TM-9-2320-283-13-P

ANTI-LOCK BRAKE SYSTEM (ABS) M915A1

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)

AUGUST 2012

TM-9-2320-283-13-P - Page 176 of 400

TM 9-2320-283-13&P

0020

0020-4

SEAL INSTALLER

1

2

3

INSTALLATION – CONTINUED

NOTE

Do not get grease on rear seal shoulder bore of wheel hub when

installing inner bearing cone.

5.

Apply grease to inner bearing cone (figure 4, item 2) and set inner bearing cone (figure 4, item 2) on

inner cup in rear hub (figure 4, item 3).

6.

Apply sealant to outside edge of new seal (figure 4, item 1) and position seal (figure 4, item 1) on rear

hub (figure 4, item 3) with tapered side of seal facing up.

7.

Using seal installer, drive seal (figure 4, item 1) into shoulder bore of rear hub (figure 4, item 3) until

fully seated.

Figure 4. Installing Inner Bearing Cone and Seal.