TM-9-2320-283-13-P

ANTI-LOCK BRAKE SYSTEM (ABS) M915A1

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)

AUGUST 2012

TM-9-2320-283-13-P - Page 179 of 400

0021-1

Figure 1. Removing Front Tone Ring.

END OF TASK

TM 9-2320-283-13&P

0021

FIELD MAINTENANCE

TONE RING REPLACEMENT

INITIAL SETUP:

Tools and Special Tools

Tool kit, general mechanic’s (WP 0063, Table 2, Item 8)

References

TM 9-2320-283-20

Equipment Condition

Front or rear-rear axle hub removed

(WP 0019, WP 0020).

1

2

REMOVAL

NOTE

Tone rings on front and rear-rear axle hubs are removed and installed

the same way. This procedure covers replacement of front tone ring.

1.

Position front hub (figure 1, item 2) on flat surface with tone ring (figure 1, item 1) facing up.

CAUTION

Be careful not to bend or distort tone ring when removing. Failure to

comply will result in damage to equipment.

2.

Using flat and narrow piece of wood, approximately 12 in. (30.5 cm) in length, and hammer, carefully

remove tone ring (figure 1, item 1) from front hub (figure 1, item 2).