TM-9-2320-283-13-P

ANTI-LOCK BRAKE SYSTEM (ABS) M915A1

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)

AUGUST 2012

TM-9-2320-283-13-P - Page 209 of 400

0026-1

TM 9-2320-283-13&P

0026

FIELD MAINTENANCE

FRONT AND REAR MODULATORS REPLACEMENT

NOTE

This task covers removal and installation of front and rear

modulators. Left side is shown.

REMOVAL, FRONT MODULATOR

1.

Disconnect wheel sensor cable (figure 1, item 1) from wheel sensor harness connector (figure 1, item 4)

and disconnect modulator harness connector (figure 1, item 3) from front modulator (figure 1, item 2).

Tools

Tool kit, general mechanic’s (WP 0063, Table 2, Item 8)

Materials/Parts

Two locknuts (WP 0044, Item 2)

Two locknuts (WP 0044, Item 7)

Two locknuts (WP 0044, Item 8)

References

WP 0021

TM 9-2320-283-20

TM 9-2320-283-10

Equipment Condition

Air reservoirs drained (TM 9-2320-283-10).

Battery power disconnected (TM 9-2320-283-20).

1

2

3

4

INITIAL SETUP:

Figure 1. Disconnecting Front Wheel Sensor and Modulator.