TM-9-2320-283-13-P
ANTI-LOCK BRAKE SYSTEM (ABS) M915A1
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)
AUGUST 2012
TM-9-2320-283-13-P - Page 213 of 400
TM 9-2320-283-13&P
0026
0026-5
0026-5
INSTALLATION, REAR MODULATOR – CONTINUED
7.
Connect modulator harness connector (figure 6, item 6) to rear modulator (figure 6, item 1), and connect
wheel sensor cable (figure 6, item 3) to wheel sensor harness connector (figure 6, item 4).
1
2
4
5
6
7
8
9
10
11
12
13
3
Figure 6. Connecting Rear Wheel Sensor and Modulator.
END OF TASK
INSTALLATION, FRONT MODULATOR
NOTE
Perform step 1 if fittings have been removed from front modulator.
1.
Install elbow (figure 7, item 6) on front modulator inlet (figure 7, item 7), and install adapter
(figure 7, item 10) on front modulator outlet (figure 7, item 9). Connect tube (figure 7, item 11) to
adapter (figure 7, item 10).
2.
Position front modulator (figure 7, item 8), connect tube (figure 7, item 11) to elbow (figure 7, item 1),
and install front modulator (figure 7, item 8) on frame rail (figure 7, item 2) with two washers
(figure 7, item 12), bolts (figure 7, item 13), washers (figure 7, item 3), and new locknuts
(figure 7, item 4).
3.
Connect tube (figure 7, item 5) to elbow (figure 7, item 6) on front modulator (figure 7, item 8).
1
2
3
4
5
6
10
9
8
7
Figure 7. Installing Front Modulator.
Back to Top
