TM-9-2320-283-13-P

ANTI-LOCK BRAKE SYSTEM (ABS) M915A1

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)

AUGUST 2012

TM-9-2320-283-13-P - Page 222 of 400

TM 9-2320-283-13&P

0028

0028-2

REMOVAL – CONTINUED

4.

Disconnect trailer brake tube (figure 2, item 6) from adapter (figure 2, item 7) and remove adapter

(figure 2, item 7) from tee (figure 2, item 8).

5.

Disconnect tube (figure 2, item 1) from adapter (figure 2, item 2) on tee (figure 2, item 8).

6.

Remove tee (figure 2, item 8) and reducer bushing (figure 2, item 5) from quick-release valve

(figure 2, item 4) and remove quick-release valve (figure 2, item 4) from tractor protection valve

(figure 2, item 3).

1

2

3

4

5

6

7

8

Figure 2. Quick-Release Valve.

END OF TASK

INSTALLATION

WARNING

Ensure all nuts on air tube fittings are properly tightened during

installation. Refer to WP 0021. Failure to comply may result in

damage to equipment or possible injury to personnel. Seek medical

attention in the event of an injury.

NOTE

Prior to installation, ensure pipe joint compound is applied to male

pipe threads of NPT fittings only.

1.

Install quick-release valve (figure 2, item 4) on tractor protection valve (figure 2, item 3) and install

reducer bushing (figure 2, item 5) and tee (figure 2, item 8) on quick-release valve (figure 2, item 4).

2.

Connect tube (figure 2, item 1) to adapter (figure 2, item 2) on tee (figure 2, item 8).

3.

Install adapter (figure 2, item 7) on tee (figure 2, item 8) and connect trailer brake tube (figure 2, item 6) to

adapter (figure 2, item 7).