TM-9-2320-283-13-P

ANTI-LOCK BRAKE SYSTEM (ABS) M915A1

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)

AUGUST 2012

TM-9-2320-283-13-P - Page 231 of 400

0030-1

TM 9-2320-283-13&P

0030

FIELD MAINTENANCE

ABS FUSES REPLACEMENT

Tools and Special Tools

Tool kit, general mechanic’s (WP 0063, Table 2, Item 8)

References

TM 9-2320-283-20

Equipment Condition

Battery power disconnected (TM 9-2320-283-20).

1

2

3

4

5

INITIAL SETUP:

NOTE

This task covers removal and installation of the ABS ECU harness

fuses.

REMOVAL

NOTE

The ABS ECU harness 30-amp fused red wire is connected to circuit

40 purple wire and is located under the instrument panel to the left of

steering column above ECU.

1.

Locate ABS ECU 30-amp fused red wire (figure 1, item 5) and follow it to black fuse connector

(figure 1, item 1) near circuit 40 purple wire (figure 1, item 2).

2.

Pull cover (figure 1, item 3) off fuse connector (figure 1, item 1) and remove fuse (figure 1, item 4)

from fuse connector (figure 1, item 1).

3.

Examine fuse (figure 1, item 4). Discard fuse (figure 1, item 4) if center wire is burned away.

Figure 1. Removing and Checking ABS ECU 30-amp Fuse.