TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 164 of 1318

TM 9-2320-328-13&P-1

0017-34

DRAFT

0017

(b)

Display Enable.

The display enable function allows the user to take control of the pressure

governor from a specific display location.

Only one display location will be active at a time.

The

user will need to confirm a display enable action.

The display enable function screen shall look like Figure 40:

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

(c)

Settings.

The settings function allows the user to access hardware and software settings for the

system.

The settings function is broken down into the following sections:

Display settings control the appearance of the display.

It may be accessed by any user and

will not require password protection.

The display settings shall accommodate the following

setting changes:

VENDOR ART

Figure 40.

The Display Enable Screen.

•

Display Settings

•

Configuration

•

Units - The user may choose to view all units in English (default) or Metric.

•

Contrast - The user may adjust the contrast of the screen ranging from 0% to 100%

contrast.

A contrast of 50% is default.

•

Brightness - The user may adjust the brightness of the screen ranging from 0% to

100% brightness.

A brightness of 50% is default.

•

Backlighting - The user may choose to have the backlighting turned on (default) or

off.

Enable =

Cancel =

Press OK

To Take Control Using This Display

Press Back To Return

To The Previous Screen.