TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 170 of 1318

TM 9-2320-328-13&P-1

0018-4

DRAFT

0018

Change 1

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

16. Open NO. 1 DRIVER SIDE DISCHARGE drain valve (15).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

17. After pressure governor reading drops to 0 psi (0 kPa), push NO. 1 DRIVER SIDE DISCHARGE valve control

CLOSE button (16) until red indicator light (17) illuminates.

18. Close NO. 1 DRIVER SIDE DISCHARGE drain valve (15).

19. Disconnect discharge hose from NO. 1 DRIVER SIDE DISCHARGE (8).

20. Install cap (7) on NO. 1 DRIVER SIDE DISCHARGE

(8).

HWT0343

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

HWT3143