TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 177 of 1318

TM 9-2320-328-13&P-1

0020-1

DRAFT

0020

Change 1

OPERATOR MAINTENANCE

PUMPING FROM HYDRANT OR IN RELAY (POSITIVE WATER SOURCES)

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

When backing up vehicle, one crew member must be in back of vehicle operating

rear step buzzer to communicate with operator.

Failure to comply may result in

injury or death to personnel and/or damage to equipment.

1.

Position vehicle as close to water source as possible.

2.

Park vehicle (TM 9-2320-422-10).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

Do not use hard suction hose.

Hard suction hose will not hold pressure.

Hose may

fail and separate causing injury to personnel and/or damage to equipment.

NOTE

DRIVER SIDE AUX. INLET and PASSENGER SIDE AUX. INLET operate the same way.

DRIVER SIDE AUX. INLET shown.

3.

Remove cap (1) from DRIVER SIDE AUX. INLET (2).

4.

Connect 3 in. (7.6 cm) supply hose between DRIVER SIDE AUX. INLET (2) and positive water source.

WARNING

ICON 11

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

HWT3120

WARNING

ICON 72