TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 168 of 1318

TM 9-2320-328-13&P-1

0018-2

DRAFT

0018

Change 1

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

WARNING

Strainer must be positioned in water to prevent sucking of debris (sand, stones,

mud, etc.).

Strainer must be deep enough not to cause a whirlpool on surface of

water.

Failure to comply may result in injury or death to personnel and/or damage

to equipment.

7.

Unlatch suction hose strainer release clips (6).

8.

Position suction hose strainer (1) in water source.

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

NO. 1 DRIVER SIDE DISCHARGE and NO. 2 PASSENGER SIDE DISCHARGE operate

the same way.

NO. 1 DRIVER SIDE DISCHARGE shown.

9.

Remove cap (7) from NO. 1 DRIVER SIDE DISCHARGE (8).

10. Connect discharge hose to NO. 1 DRIVER SIDE DISCHARGE (8).

11. Prime water pump (WP 0016).

HWT2748

ICON 72

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

HWT3142