TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 586 of 1318

TM 9-2320-328-13&P-1

0067-6

DRAFT

0067

HWT0668A

Step 9.

Put pump operator’s panel REEL DISCHARGE switch to CLOSED position (WP 0004).

Pull battery disconnect switch to off position (WP 0007).

Disconnect main wire harness

pump operator’s panel 27-pin wire harness connector.

With a test lead set, check for

continuity across main wire harness wire 4098 (green) from main wire harness pump

operator’s panel 27-pin wire harness connector, terminal 16 to main wire harness pump

house wire harness connector, terminal 5.

a.

If there is continuity, repair wire 4098 in pump operator’s panel wire

harness if repairable (TM 9-2320-325-14&P), or replace pump

operator’s panel wire harness (WP 0303).

b.

If there is no continuity, repair wire 4098 in main wire harness if

repairable (TM 9-2320-325-14&P), or replace main wire

harness (WP 0292).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION