TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 590 of 1318

TM 9-2320-328-13&P-1

0067-10

DRAFT

0067

END OF TASK

FOLLOW-ON MAINTENANCE

Remove wheel chocks (TM 9-2320-422-10)

END OF TASK

END OF WORK PACKAGE

HWT0663A

WARNING

ICON 3

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment, or

severe burns or electrical shock to personnel.

Step 15.

Pull battery disconnect switch to off position (WP 0007).

Remove cab instrument panel

A (WP 0205).

Remove circuit breaker 10 from cab power distribution block (WP 0242).

Check for continuity across circuit breaker.

a.

If there is continuity, repair wire 2834 in cab power distribution wire

harness if repairable (TM 9-2320-325-14&P), or replace cab power

distribution wire harness and block (WP 0280).

b.

If there is no continuity, replace circuit breaker 10 (WP 0242).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION