TM-9-2320-328-13-P-1
HEMTT-BASED WATER TENDER (HEWATT)
TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3
MARCH 2009
TM-9-2320-328-13-P-1 - Page 579 of 1318
TM 9-2320-328-13&P-1
0066-9/(10 blank)
DRAFT
0066
END OF TASK
FOLLOW-ON MAINTENANCE
Remove wheel chocks (TM 9-2320-422-10)
END OF TASK
END OF WORK PACKAGE
HWT0790
Step 13.
Check for 22 to 28 VDC between hose reel rewind motor power wire at hose reel rewind
circuit breaker and a known good ground.
a.
If 22 to 28 VDC are present, replace hose reel rewind motor power wire
between hose reel rewind circuit breaker and hose reel rewind
solenoid (WP 0254).
b.
If 22 to 28 VDC are not present, repair wire if repairable
(TM 9-2320-325-14&P), or replace hose reel rewind motor power wire
between pump house B+ stud and hose reel rewind circuit
breaker (WP 0251).
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Back to Top
