TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 575 of 1318

TM 9-2320-328-13&P-1

0066-5

DRAFT

0066

HWT0470A

WARNING

ICON 3

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment, or

severe burns or electrical shock to personnel.

Step 8.

Release REEL REWIND button (WP 0004).

Pull battery disconnect switch to off

position (WP 0007).

Remove pump house panel K (WP 0339).

Open pump house

power distribution (WP 0262).

Remove circuit breaker P10 from pump house power

distribution block (WP 0262).

Check for continuity across circuit breaker.

If there is no continuity, replace circuit breaker P10 (WP 0262).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION