TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009
TM-9-2320-328-13-P-1

  TM-9-2320-328-13-P-1 - Page 570 of 1318

TM 9-2320-328-13&P-1
0065-14
DRAFT
0065
END OF TASK
FOLLOW-ON MAINTENANCE
Remove wheel chocks (TM 9-2320-422-10)
END OF TASK
END OF WORK PACKAGE
HWT0870A
Step 17.
Reconnect pump house wire harness pump house power distribution wire harness
connector DP2.
Disconnect main wire harness pump house wire harness connector.
With a test lead set, check for 22 to 28 VDC between pump house wire harness wire
4097 (orange) at main wire harness pump house wire harness connector, terminal 24
and a known good ground.
a.
If 22 to 28 VDC are present, repair wire 4097 in main wire harness if
repairable (TM 9-2320-325-14&P), or replace main wire
harness (WP 0292).
b.
If 22 to 28 VDC are not present, repair wire 4097 in pump house wire
harness if repairable (TM 9-2320-325-14&P), or replace pump house
wire harness (WP 0302).
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION


Back to Top