TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009
TM-9-2320-328-13-P-1

  TM-9-2320-328-13-P-1 - Page 569 of 1318

TM 9-2320-328-13&P-1
0065-13
DRAFT
0065
HWT0490A
Step 16.
Disconnect pump house wire harness pump house power distribution wire harness
connector DP2.
With a test lead set, check for 22 to 28 VDC between pump house
power distribution wire harness wire 4097 (orange) at connector DP2, terminal J and a
known good ground.
If 22 to 28 VDC are not present, repair wire 4097 in pump house power
distribution wire harness if repairable (TM 9-2320-325-14&P), or replace
pump house power distribution wire harness and block (WP 0299).
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION


Back to Top