TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 565 of 1318

TM 9-2320-328-13&P-1

0065-9

DRAFT

0065

HWT0577

Step 11.

Connect valve control wire harness connector to driver side auxiliary inlet valve motor.

Disconnect valve control wire harness connector from PASSENGER SIDE AUX. INLET

valve control.

Connect driver side auxiliary inlet valve control wire harness connector to

PASSENGER SIDE AUX. INLET valve control.

While an assistant pushes pump

operator’s panel PASSENGER SIDE AUX. INLET valve control OPEN and CLOSE

buttons (WP 0004), check if driver side auxiliary inlet valve operates.

a.

If driver side auxiliary inlet valve operates, reconnect valve control wire

harnesses to original positions and replace DRIVER SIDE AUX. INLET

valve control (WP 0209).

b.

If driver side auxiliary inlet valve does not operate, reconnect valve

control wire harnesses to original positions and replace driver side

auxiliary inlet valve motor (WP 0248).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION