TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 564 of 1318

TM 9-2320-328-13&P-1

0065-8

DRAFT

0065

HWT0486A

WARNING

ICON 3

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment, or

severe burns or electrical shock to personnel.

Step 10.

Pull battery disconnect switch to off position (WP 0007).

Disconnect valve control wire

harness connector from DRIVER SIDE AUX. INLET valve control.

Disconnect valve

control wire harness connector from driver side auxiliary inlet valve motor.

With a test

lead set, check for continuity across valve control wire harness from DRIVER SIDE

AUX. INLET valve control connector to driver side auxiliary inlet valve motor connector.

If there is no continuity, repair valve control wire harness if repairable

(TM 9-2320-325-14&P), or replace driver side auxiliary inlet valve control

wire harness (WP 0285).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION