TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 814 of 1318

TM 9-2320-328-13&P-1

0073-28

DRAFT

0073

END OF TASK

FOLLOW-ON MAINTENANCE

1.

Install skid plate grille if removed (WP 0349)

2.

Remove wheel chocks (TM 9-2320-422-10)

END OF TASK

END OF WORK PACKAGE

HWT0991A

Step 38.

Check if hard suction hose is free from holes, leaks, and damage.

If hard suction hose is not free from holes, leaks, and damage, replace hard

suction hose.

Step 39.

Connect hard suction hose to driver main inlet (WP 0018).

Prepare vehicle to pump

from draft (WP 0018).

Check if primer pump is drawing water to water pump.

a.

If hard suction hose coupler is fully seated and not drawing water into

water pump, replace primer pump (WP 0165).

b.

If hard suction hose coupler is not fully seated, use rubber mallet to

tighten hard suction hose at driver main inlet (WP 0018).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION