TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009
TM-9-2320-328-13-P-1

  TM-9-2320-328-13-P-1 - Page 811 of 1318

TM 9-2320-328-13&P-1
0073-25
DRAFT
0073
HWT3107
Step 33.
Disconnect pump house wire harness pump house power distribution connector DP1.
With a test lead set, check for continuity across pump house wire harness wire 4064
(red) from pump house wire harness pump house power distribution wire harness
connector DP1, terminal A to primer valve control solenoid, terminal.
a.
If there is continuity, repair wire 4064 in pump house power distribution
if repairable (TM 9-2320-325-14&P), or replace pump house power
distribution wire harness (WP 0299).
b.
If there is no continuity, repair wire 4064 in pump house wire harness if
repairable (TM 9-2320-325-14&P), or replace pump house wire
harness (WP 0302).
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION


Back to Top