TM-9-2320-328-13-P-3

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 3 OF 3

MARCH 2009

TM-9-2320-328-13-P-3 - Page 157 of 844

TM 9-2320-328-13&P-3

0343-3

DRAFT

0343

Change 1

DISASSEMBLY

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

Note position of washers prior to removal to ensure proper installation.

1.

Remove two locknuts (1), four washers (2), two thrust washers (3), screws (4), and lower ladder section (5)

from left hand rail (6) and right hand rail (7).

Discard locknuts.

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

•

All steps are removed the same way.

•

Steps on swing down lower ladder section are not removable.

2.

Remove four nuts (8), lockwashers (9), eight washers (10), four screws (11), and step (12) from left hand

rail (6) and right hand rail (7).

Discard lockwashers.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

HWT3427

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

HWT3428