TM-9-2320-328-13-P-3

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 3 OF 3

MARCH 2009

TM-9-2320-328-13-P-3 - Page 166 of 844

TM 9-2320-328-13&P-3

0344-4

DRAFT

0344

Change 1

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

7.

Remove four locknuts (13), screws (14), and two brackets (11) from rear hard lift assembly (2).

Discard

locknuts.

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

End plate tube weighs approximately 70 lb. (31.8 kg).

Do not attempt to lift or move

end plate tube without the aid of an assistant.

Failure to comply may result in injury

to personnel.

NOTE

Driver side and passenger side end plate tube assemblies are removed the same way.

Driver side shown.

8.

Remove lockpin (1) from rear hard lift assembly (2).

HWT1218

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

HWT3495

WARNING

ICON 7