TM-9-2320-328-13-P-3

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 3 OF 3

MARCH 2009

TM-9-2320-328-13-P-3 - Page 169 of 844

TM 9-2320-328-13&P-3

0344-7

DRAFT

0344

Change 1

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

•

Hard lift assembly weighs approximately 1,000 lb. (454 kg).

Do not attempt to lift or

move hard lift assembly without the aid of an assistant and a suitable lifting device.

Failure to comply may result in injury to personnel.

•

All personnel must stand clear during lifting operations.

A swinging or shifting load

may cause injury or death to personnel.

NOTE

Note locations of screws (9) and (10) as noted prior to removal.

8.

With the aid of an assistant and a suitable lifting device, place rear hard lift assembly (2) into position and

install two brackets (11) on frame (12) with four screws (10), four screws (9), and eight locknuts (8).

Tighten

locknuts (8) to 339 lb-ft (460 N•m).

HWT1217

WARNING

ICON 10,11