TM-9-2320-328-13-P-3

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 3 OF 3

MARCH 2009

TM-9-2320-328-13-P-3 - Page 167 of 844

TM 9-2320-328-13&P-3

0344-5

DRAFT

0344

Change 1

9.

With the aid of an assistant, remove end plate tube (3) from rear hard lift tube (6).

10. Remove keyring (15) from lockpin (1).

11. Remove keyring (16) from rear hard lift tube (6).

12. Remove two keyrings (15) and (16) from chain (17).

END OF TASK

INSTALLATION

1.

Install two keyrings (16) and (15) on chain (17).

2.

Install keyring (16) on rear hard lift tube (6).

3.

Install keyring (15) on lockpin (1).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

•

End plate tube weighs approximately 70 lb. (31.8 kg).

Do not attempt to lift or move

end plate tube without the aid of an assistant.

Failure to comply may result in injury

to personnel.

•

Ensure end plate tube bushings are in the lift position as noted prior to removal.

4.

With the aid of an assistant, install end plate tube (3) in rear hard lift tube (6).

5.

Install lockpin (1) in rear hard lift assembly (2).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

- -

-

-

-

-

-

-

-

-

-

-

WARNING

ICON 7