TM-9-2320-328-13-P-3

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 3 OF 3

MARCH 2009

TM-9-2320-328-13-P-3 - Page 158 of 844

TM 9-2320-328-13&P-3

0343-4

DRAFT

0343

Change 1

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

3.

Remove locknut (13), screw (14), and rubber draw latch (15) from bracket (16).

Discard locknut.

4.

Remove locknut (17), washer (18), screw (19), and bracket (16) from lower ladder section (5).

Discard

locknut.

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

5.

Remove two locknuts (20), screws (21), and bracket (22) from right had rail (7).

Discard locknuts.

END OF TASK

ASSEMBLY

1.

Install bracket (22) on right hand rail (7) with two screws (21) and locknuts (20).

2.

Install bracket (16) on lower ladder section (5) with screw (19), washer (18), and locknut (17).

3.

Install rubber draw latch (15) on bracket (16) with screw (14) and locknut (13).

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

HWT3429

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

HWT3430