TM-9-2320-328-13-P-3

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 3 OF 3

MARCH 2009

TM-9-2320-328-13-P-3 - Page 164 of 844

TM 9-2320-328-13&P-3

0344-2

DRAFT

0344

Change 1

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

Do not extend end plate tube too far out of rear hard lift tube.

End plate tube weighs

approximately 70 lb. (31.8 kg) and may come out of rear hard lift tube and drop

suddenly causing injury to personnel.

2.

Pull end plate tube (3) out and rotate until bushing (4) on end plate tube (3) is pointing toward the 11 o’clock

position.

3.

Push end plate tube (3) in, and align hole (5) in rear hard lift tube (6) with hole (7) in end plate tube (3).

4.

Install lockpin (1) in rear hard lift tube (6) and end plate tube (3).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

HWT3494

WARNING

ICON 7