TM-9-2320-328-13-P-3

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 3 OF 3

MARCH 2009

TM-9-2320-328-13-P-3 - Page 170 of 844

TM 9-2320-328-13&P-3

0344-8

DRAFT

0344

Change 1

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

•

Perform Steps (10) through (13) to place rear hard lift assembly in operating position.

•

Driver side and passenger side end plate tubes are installed the same way.

Driver side

shown.

9.

Remove lockpin (1) from rear hard lift assembly (2).

10. Push end plate tube (3) in and rotate until bushing (4) on end plate tube (3) is pointing toward the 3 o’clock

position.

11. Align hole (5) in rear hard lift tube (6) with hole (7) in end plate tube (3).

12. Install lockpin (1) in rear hard lift tube (6) and end plate tube (3).

END OF TASK

FOLLOW-ON MAINTENANCE

Remove wheel chocks (TM 9-2320-422-10)

END OF TASK

END OF WORK PACKAGE

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

HWT3496