TM-9-2320-366-20-3

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 3 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-3 - Page 353 of 1396

TM 9-2320-366-20-3

VOLTAGE TEST

Remove rings, bracelets, watches, necklaces,

and any other jewelry before working around

vehicle.

Jewelry can catch on equipment and

cause injury or short across electrical circuits

and cause severe burns or electrical shock.

WARNING

(1) Remove dust boot from terminal lug TL23.

(2) Set multimeter to volts DC.

(3) Connect positive (+) probe of multimeter to

terminal lug TL23.

(4) Connect negative (-) probe of multimeter to

a known good ground and note reading on

multimeter.

(5) If 24 VDC is not present, replace circuit

breaker CB11 (para 20-81).

(6) If 24 VDC is present, replace power cable

from terminal lug TL23 to terminal lug TL16

(para 20-81).

Perform steps (7) through (9) if circuit

breaker CB11 is faulty.

(7) Position electrical distribution block cover

on power distribution shelf.

(8) Tighten wing screw on electrical

distribution block cover.

(9) Install wing screw on power distribution

shelf.

NOTE

Change 2

2-2279