TM-9-2320-366-34-2

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 4

AUGUST 2005

CHANGE 2

TM-9-2320-366-34-2 - Page 573 of 1434

TM 9-2320-366-34-2

Change 2

10-23

b. Cleaning/Inspection.

(1)

Clean all metal parts with dry cleaning solvent.

(2) Inspect all metal parts for pitting, corrosion,

or signs of wear.

c. Assembly.

(1)

Install seals (1 and 2) on spacer (3).

WARNING

•

Dry Cleaning Solvent (PD-680) is TOXIC and flammable.

Wear protective goggles and

gloves; use only in well ventilated area; avoid contact with skin,

eyes, and clothes, and do

not breathe vapors.

Keep away from heat or flame.

Never smoke when using solvent; the

flashpoint for Type I Dry Cleaning Solvent is 100

F (38 C) and for Type II is 130 F (50 C).

Failure to comply may result in serious injury or death to personnel.

•

If personnel become dizzy while using cleaning solvent, immediately get fresh air and

medical help.

If dry cleaning solvent contacts skin or clothes, flush with cold water.

If dry

cleaning solvent contacts eyes, immediately flush eyes with water and get immediate

medical attention.

Failure to comply may result in injury to personnel.

NOTE

Replace any part that fails visual inspection.

NOTE

Apply lubricating oil to all parts during

assembly.