TM-9-2320-366-34-2

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 4

AUGUST 2005

CHANGE 2

TM-9-2320-366-34-2 - Page 580 of 1434

TM 9-2320-366-34-2

10-4. REAR AXLE BOGIE SHAFT REPLACEMENT

This task covers:

a. Removal

b. Installation

c. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Rear axle bogie removed (para 10-3).

Tools and Special Tools

Tool Kit, Genl Mech (Item 78, Appendix B)

Wrench, Impact, Electric (Item 88, Appendix B)

Socket Set, Impact (Item 58, Appendix B)

Wrench, Set, Socket (Item 84, Appendix B)

Wrench, Torque, 0-600 lb-ft (Item 97, Appendix B)

Materials/Parts

Nut, Self-Locking (8) (Item 211, Appendix F)

Bolt (4) (Item 20, Appendix F)

Grease, Automotive and Artillery (Item 33,

Appendix C)

Personnel Required

(2)

a. Removal.

CAUTION

When removing bolts, continuous removal of

collars is mandatory. Failure to comply may

result in seizing of collar to bolt.

NOTE

• Left and right side rear axle bogie shafts are

removed the same way. Right side shown.

• Steps (1) and (2) require the aid of an assistant.

(1) Remove four collars (1) and bolts (2) from rear axle

bogie shaft (3). Discard collars and bolts.

(2) Remove four self-locking nuts (4), bolts (5), and rear axle

bogie shaft (3) from frame rail (6). Discard self-locking

nuts.

10-28