TM-9-2320-387-24-1

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 1

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-1 - Page 545 of 1205

TM

9-2320-387-24-l

2-46.

STEKE-R

TEST PROCEDURES

(Cont’d)

STARTER SOLENOID VOLTS TEST #70

Description:

This procedure

measures the voltage present

at the starter solenoids positive terminal. Test

requires DCA hookup only.

Typical Applications:

Control Functions:

Check starter solenoid volts.

01,02,

03, 04,06

Test Procedure:

1. Disconnect fuel solenoid wire 54A to prevent

starting.

2. Set TEST SELECT switch to 70.

3. Press and release TEST button.

4. Crank the engine and observe the displayed

voltage.

Pre-Test Procedures:

Run confidence

test.

Possible Error Messages:

None.

2-499