TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 1110 of 1616

TM 9-2320-440-13&P

0156-4

0156

INSTALLATION

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

Both transverse beams are installed the same way. No. 4 axle shown.

1.

Install two washers (19) on equalizing beams (17).

WARNING

Transverse beam is heavy (Aprox. 105 lbs). Do not lift transverse beam without the aid of Soldier B.

Failure to comply may result in injury to personnel.

2.

Soldier A and Soldier B position transverse beam (18) on two equalizing beams (17).

NOTE

Install spacers as noted prior to removal.

3.

Install two spacers (16), washers (14), and nuts (15) on equalizing beams (17).

Tighten nuts (15) to 500 lb-ft

(678 N•m).

4.

Bend lock tab of two washers (14) against flat of nuts (15).

NOTE

Each suspension air spring is secured to transverse beam with one nut and lockwasher.

5.

Install two suspension air springs (11) on transverse beam (18) with two lockwashers (13) and nuts (12).

Tighten nuts (12) to 30 to 35 lb-ft (41 to 48 N•m).