TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 1104 of 1616

TM 9-2320-440-13&P

0155-4

0155

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

4.

Remove locknut (2) and washer (5) from lateral torque rod (3).

NOTE

Note position and number of shims prior to removal to ensure proper installation.

5.

Soldier A and Soldier B remove two locknuts (1), four washers (6), two screws (7), lateral torque rod (3),

bracket (8), shim(s) (9), and plate (10) from frame rail (11) and axle mount (4).

END OF TASK

LATERAL TORQUE ROD INSTALLATION

NOTE

•

Both lateral torque rods are installed the same way.

No. 4 axle shown.

•

Adjust mounting pin to same angle as noted prior to removal.

1.

Lubricate threads of lateral torque rod (3) with lubricating oil and position tapered end of lateral torque rod (3)

in axle mount (4).

NOTE

Install shims in same position as noted prior to removal.

2.

Soldier A and Soldier B lubricate threads of two screws (7) with lubricating oil and install plate (10),

shim(s) (9), bracket (8), and lateral torque rod (3) on frame rail (11) with two screws (7), four washers (6), and

two locknuts (1).

3.

Install lateral torque rod (3) on axle mount (4) with washer (5) and locknut (2). Tighten locknut (2) to 175 to

225 lb-ft (237 to 305 N•m).

THAAD0389