TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 1111 of 1616

TM 9-2320-440-13&P

0156-5

0156

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

•

Both height control links are connected to height control valve the same way.

Right side

height control valve shown.

•

Install washers as noted prior to removal.

6.

Lubricate threads of screw (8) with lubricating oil and install height control link (9) on height control valve (10)

with screw (8), washer (7), washer (6), and locknut (5). Tighten locknut (5) to 4 to 5 lb-ft (5.4 to 6.8 N•m).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

7.

Position jack (1) and jack base plate (2) under rear crossmember (3) of vehicle.

8.

Raise vehicle.

9.

Remove two jackstands (4) from under rear crossmember (3).

10. Lower vehicle and stow jack (1) and jack base plate (2).

END OF TASK

THAAD0118

THAAD0117