TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 1101 of 1616

TM 9-2320-440-13&P

0155-1

0155

FIELD LEVEL MAINTENANCE

TORQUE ROD REPLACEMENT

INITIAL SETUP:

LONGITUDINAL TORQUE ROD REMOVAL

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

•

Both longitudinal torque rods are removed the same way.

No. 4 axle shown.

•

Note angle of mounting pins on longitudinal torque rod prior to removal to ensure proper

installation.

•

Remove cable ties as required.

1.

Remove two locknuts (1), screws (2), four washers (3), and longitudinal torque rod (4) from axle mount (5).

Discard locknuts.

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

THAAD0386

Tools and Special Tools

Jack Kit, Hydraulic, Hand (WP 0183, Item 9)

Standard Automotive Tool Set

(WP 0183, Item 22)

Tool Kit, General Mechanic’s: Automotive

(WP 0183, Item 25)

Wrench, Torque (WP 0183, Item 31)

Materials/Parts

Locknut, (6), (WP 0184, Item 70)

Locknut, (1), (WP 0184, Item 35)

Oil, Lubricating (WP 0186, Item 22)

Ties, Cable, Plastic (WP 0186, WP 34)

Personnel Required

MOS 63B Wheeled vehicle mechanic (2)

References

None

Equipment Conditions

Engine OFF (

Wheels chocked (

TM 9-2320-347-10)

TM 9-2320-347-10)