TM-9-2330-202-13-P
TRAILER, CARGO, 3/4-TON, 2-WHEEL: M101A1, M101A2 AND M101A3; TRAILER, CHASSIS, 3/4-TON, 2-WHEEL: M116A1 AND M116A2; TRAILER, CHASSIS, 1-TON, 2-WHEEL: M116A3
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
DECEMBER 2011
TM-9-2330-202-13-P - Page 173 of 552
FIELD MAINTENANCE
COMPOSITE STOPLIGHT-TAILLIGHT MAINTENANCE
INITIAL SETUP:
Tools and Special Tools
Tool Kit, General Mechanic's
(WP
0115, Table 1, Item 1)
Materials/Parts
Packing, preformed (WP
0082, Figure 1, Item 3)
Two lockwashers (WP
0082, Figure 1, Item 4)
Tag, marker (as needed)
(WP
0114, Table 1, Item 25)
Equipment Condition
Intervehicular cable disconnected from prime
mover (WP
0005)
LAMP/LED REMOVAL
NOTE
Both 12 VDC and 24 VDC lamps are available. If prime mover is a CUCV, 12 VDC lamps
should be used.
1.
Loosen six captive screws (Figure 1, Item 3), and remove lens (Figure 1, Item 4) from body (Figure 1, Item 7).
2.
Inspect preformed packing (Figure 1, Item 2) for damage. If damaged, remove preformed packing
(Figure 1, Item 2) and discard.
3.
Remove two lamps (Figure 1, Items 5 and 6) from sockets (Figure 1, Item 1) by pushing in and
turning counterclockwise.
1
2
3
4
5
6
7
M116_M101_049A
Figure 1.
Lamp Removal.
TM 9-2330-202-13&P
0037
0037-1
Back to Top
