TM-9-2330-202-13-P
TRAILER, CARGO, 3/4-TON, 2-WHEEL: M101A1, M101A2 AND M101A3; TRAILER, CHASSIS, 3/4-TON, 2-WHEEL: M116A1 AND M116A2; TRAILER, CHASSIS, 1-TON, 2-WHEEL: M116A3
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
DECEMBER 2011
TM-9-2330-202-13-P - Page 175 of 552
COMPOSITE STOPLIGHT-TAILLIGHT REMOVAL
NOTE
If marker bands are missing or illegible, tag wires for installation purposes.
1.
Remove four composite stoplight-taillight connectors (Figure 3, Item 3) and chassis wiring harness connectors
(Figure 3, Item 4) from clip (Figure 3, Item 2) and disconnect connectors (Figure 3, Items 3 and 4).
2.
Remove grommet (Figure 3, Item 1) from hole (Figure 3, Item 13) in frame.
3.
Pull four wires (Figure 3, Item 12) of composite stoplight-taillight (Figure 3, Item 7) through hole
(Figure 3, Item 13) in frame.
4.
Remove two cap screws (Figure 3, Item 11), lockwashers (Figure 3, Item 10), and washers (Figure 3, Item 9)
and composite stoplight-taillight (Figure 3, Item 7) from bracket (Figure 3, Item 8). Discard lockwashers
(Figure 3, Item 10) and washers (Figure 3, Item 9).
5.
If bracket (Figure 3, Item 8) is damaged, remove two self-locking nuts (Figure 3, Item 5) and cap screws
(Figure 3, Item 6) and bracket (Figure 3, Item 8) from frame. Discard self-locking nuts (Figure 3, Item 5).
1
1
2
3
4
5
6
7
8
9
10
11
12
13
M116_M101_051
Figure 3.
Composite Stoplight-Taillight Removal.
END OF TASK
TM 9-2330-202-13&P
0037
0037-3
Back to Top
