TM-9-2330-202-13-P

TRAILER, CARGO, 3/4-TON, 2-WHEEL: M101A1, M101A2 AND M101A3; TRAILER, CHASSIS, 3/4-TON, 2-WHEEL: M116A1 AND M116A2; TRAILER, CHASSIS, 1-TON, 2-WHEEL: M116A3

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

DECEMBER 2011

TM-9-2330-202-13-P - Page 177 of 552

FIELD MAINTENANCE

BLACKOUT STOPLIGHT MAINTENANCE (M101A1 AND M116A1)

INITIAL SETUP:

Tools and Special Tools

Tool Kit, General Mechanic's

(WP

0115, Table 1, Item 1)

Materials/Parts

Lockwasher (WP

0082, Figure 1, Item 27)

Gasket (WP

0082, Figure 1, Item 32)

Cloth, abrasive

(WP

0114, Table 1, Item 7)

Detergent, general purpose

(WP

0114, Table 1, Item 8)

Materials/Parts (cont.)

Rag, wiping

(WP

0114, Table 1, Item 24)

Tag, marker (as needed)

(WP

0114, Table 1, Item 27)

References

TM 43-0139

Equipment Condition

Intervehicular cable disconnected from prime

mover (WP

0005)

LAMP REPLACEMENT

1.

Remove two screws (Figure 1, Item 3), lens retainer (Figure 1, Item 2), and gasket (Figure 1, Item 1). Discard

gasket (Figure 1, Item 1).

2.

Remove lamp (Figure 1, Item 4) from socket (Figure 1, Item 5) by pushing in and turning counterclockwise.

3.

Install lamp (Figure 1, Item 4) in socket (Figure 1, Item 5) by pushing in and turning clockwise.

4.

Install new gasket (Figure 1, Item 1), lens retainer (Figure 1, Item 2), and two screws (Figure 1, Item 3).

1

2

3

4

5

M116_M101_053

Figure 1.

Lamp Replacement.

END OF TASK

TM 9-2330-202-13&P

0038

0038-1