TM-9-2330-202-13-P
TRAILER, CARGO, 3/4-TON, 2-WHEEL: M101A1, M101A2 AND M101A3; TRAILER, CHASSIS, 3/4-TON, 2-WHEEL: M116A1 AND M116A2; TRAILER, CHASSIS, 1-TON, 2-WHEEL: M116A3
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
DECEMBER 2011
TM-9-2330-202-13-P - Page 186 of 552
STOPLIGHT DISASSEMBLY
1.
Push back three shells (Figure 4, Item 2) and remove slotted washers (Figure 4, Item 3) and shells
(Figure 4, Item 2) off wire.
NOTE
Screws are held in lens retainer by retainers.
2.
Loosen six screws (Figure 4, Item 10), remove lens retainer (Figure 4, Item 11), and preformed packing
(Figure 4, Item 9). Discard preformed packing (Figure 4, Item 9).
3.
Remove lamp (Figure 4, Item 12) and two lamps (Figure 4, Item 8) from sockets (Figure 4, Item 7) by pushing
in and turning counterclockwise.
4.
Remove two screws (Figure 4, Item 6) and lockwashers (Figure 4, Item 5). Discard lockwashers
(Figure 4, Item 5).
5.
Remove three screws (Figure 4, Item 13) and pull socket and wiring assembly (Figure 4, Item 4), retaining
plate (Figure 4, Item 14), and grommet (Figure 4, Item 15) out of housing (Figure 4, Item 1).
1
2
3
4
5
6
7
8
8
9
10
11
12
13
14
15
M116_M101_060
Figure 4.
Stoplight Disassembly.
END OF TASK
TM 9-2330-202-13&P
0039
0039-4
Back to Top
