TM-9-2330-202-13-P

TRAILER, CARGO, 3/4-TON, 2-WHEEL: M101A1, M101A2 AND M101A3; TRAILER, CHASSIS, 3/4-TON, 2-WHEEL: M116A1 AND M116A2; TRAILER, CHASSIS, 1-TON, 2-WHEEL: M116A3

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

DECEMBER 2011

TM-9-2330-202-13-P - Page 189 of 552

FIELD MAINTENANCE

CHASSIS WIRING HARNESS REPLACEMENT

INITIAL SETUP:

Tools and Special Tools

Tool Kit, General Mechanic's

(WP

0115, Table 1, Item 1)

Materials/Parts

Fifteen lockwashers

(WP

0085, Figure 4, Item 2)

Two electrical tiedown straps

Materials/Parts (cont.)

(WP

0085, Figure 4, Item 5)

Lockwasher (WP

0085, Figure 4, Item 8)

Tag, marker (as needed)

(WP

0114, Table 1, Item 27)

Equipment Condition

Intervehicular cable disconnected from

prime mover (WP

0005)

NOTE

Configuration of chassis wiring harness varies slightly with model. The M116A2 chassis trailer

is shown.

REMOVAL

1.

Remove four screws (Figure 1, Item 2), lockwashers (Figure 1, Item 1), and cover (Figure 1, Item 5) from

junction box (Figure 1, Item 3) at roadside drawbar (Figure 1, Item 4). Discard lockwashers (Figure 1, Item 1).

1

2

3

4

5

M116_M101_062

Figure 1.

Junction Box Cover Removal.

TM 9-2330-202-13&P

0040

0040-1