TM-9-2330-202-13-P
TRAILER, CARGO, 3/4-TON, 2-WHEEL: M101A1, M101A2 AND M101A3; TRAILER, CHASSIS, 3/4-TON, 2-WHEEL: M116A1 AND M116A2; TRAILER, CHASSIS, 1-TON, 2-WHEEL: M116A3
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
DECEMBER 2011
TM-9-2330-202-13-P - Page 197 of 552
FIELD MAINTENANCE
AXLE REPLACEMENT
INITIAL SETUP:
Tools and Special Tools
Tool Kit, General Mechanic's
(WP
0115, Table 1, Item 1)
Materials/Parts
Eight self-locking nuts
(WP
0099, Figure 18, Item 9)
Personnel Required
Two
Equipment Condition
Shock absorbers removed (WP
0066)
Equipment Condition (cont.)
Hydraulic brake lines removed from axle
(WP
0052)
Service brakes removed
(WP
0045) or (WP
0046)
WARNING
Trailer must be supported by blocking or support stands placed under axle or frame
throughout maintenance procedure. Failure to comply may result in death or injury to
personnel. Seek medical attention in the event of an injury.
NOTE
Replacement of axle is the same for all models. This procedure shows replacement of the
M116A2 axle.
TM 9-2330-202-13&P
0042
0042-1
Back to Top
