TM-9-2330-202-13-P

TRAILER, CARGO, 3/4-TON, 2-WHEEL: M101A1, M101A2 AND M101A3; TRAILER, CHASSIS, 3/4-TON, 2-WHEEL: M116A1 AND M116A2; TRAILER, CHASSIS, 1-TON, 2-WHEEL: M116A3

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

DECEMBER 2011

TM-9-2330-202-13-P - Page 319 of 552

ASSEMBLY

Loosely install two shackles (Figure 3, Items 4 and 15) on rear spring hanger (Figure 3, Item 7) with shackle

pin (Figure 3, Item 5) and slotted nut (Figure 3, Item 14).

END OF TASK

INSTALLATION

WARNING

Spring weighs over 100 lb (45 kg). Use suitable lifting device. Failure to comply may result in

death or injury to personnel. Seek medical attention in the event of an injury.

1.

Position spring assembly (Figure 3, Item 11) above axle (Figure 3, Item 8).

2.

At front spring hanger (Figure 3, Item 1), loosely install spring assembly (Figure 3, Item 11) on frame

(Figure 3, Item 3) with shackle pin (Figure 3, Item 2) and slotted nut (Figure 3, Item 12).

3.

At rear spring hanger (Figure 3, Item 7), loosely install spring assembly (Figure 3, Item 11) on two shackles

(Figure 3, Items 4 and 15) with shackle pin (Figure 3, Item 6) and slotted nut (Figure 3, Item 13).

4.

Use lifting device to raise axle (Figure 3, Item 8) until it contacts underside of spring assembly

(Figure, 3, Item 11). Engage spring assembly center bolt head (Figure 3, Item 10) with hole in spring mounting

pad (Figure 3, Item 9).

7

8

9

10

13

14

15

3

4

5

6

11

1

2

12

M116_M101_4-106B

Figure 3.

Spring Assembly Installation.

TM 9-2330-202-13&P

0065

0065-5