TM-9-2330-202-13-P
TRAILER, CARGO, 3/4-TON, 2-WHEEL: M101A1, M101A2 AND M101A3; TRAILER, CHASSIS, 3/4-TON, 2-WHEEL: M116A1 AND M116A2; TRAILER, CHASSIS, 1-TON, 2-WHEEL: M116A3
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
DECEMBER 2011
TM-9-2330-202-13-P - Page 313 of 552
FIELD MAINTENANCE
SAFETY CHAINS REPLACEMENT
INITIAL SETUP:
Tools and Special Tools
Tool Kit, General Mechanic's
(WP
0115, Table 1, Item 1)
Wrench, Torque (WP
0115, Table 1, Item 3)
Materials/Parts
Self-locking nut
(WP
0097, Figure 16, Item 13)
NOTE
Mounting cap screw for safety chains passes through hydraulic brake actuator
assembly components.
REMOVAL
Remove self-locking nut (Figure 1, Item 5), cap screw (Figure 1, Item 1), and two safety chains
(Figure 1, Item 2) from two drawbars (Figure 1, Item 3) and drawbar bracket assembly (Figure 1, Item 4).
Discard self-locking nut (Figure 1, Item 5).
1
2
2
3
4
5
M116_M101_4-103
Figure 1.
Safety Chain Removal.
END OF TASK
TM 9-2330-202-13&P
0064
0064-1
Back to Top
