TM-9-2330-202-13-P

TRAILER, CARGO, 3/4-TON, 2-WHEEL: M101A1, M101A2 AND M101A3; TRAILER, CHASSIS, 3/4-TON, 2-WHEEL: M116A1 AND M116A2; TRAILER, CHASSIS, 1-TON, 2-WHEEL: M116A3

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

DECEMBER 2011

TM-9-2330-202-13-P - Page 306 of 552

REMOVAL

1.

Raise trailer with lifting device. Position suitable supports (Figure 1, Item 3) under both drawbars

(Figure 1, Item 4). Lower and remove lifting device.

2.

Remove cotter pin (Figure 1, Item 8), nut (Figure 1, Item 17), and drawbar ring (Figure 1, Item 15). Discard

cotter pin (Figure 1, Item 8).

3.

Remove two self-locking nuts (Figure 1, Item 10), cap screws (Figure 1, Item 13), and support leg

(Figure 1, Item 12). Discard self-locking nuts (Figure 1, Item 10).

4.

Remove self-locking nut (Figure 1, Item 16), bolt (Figure 1, Item 9), and bracket (Figure 1, Item 11). Discard

self-locking nut (Figure 1, Item 16).

5.

Remove self-locking nut (Figure 1, Item 1), cap screw (Figure 1, Item 6), and safety chains

(Figure 1, Items 7 and 18). Discard self-locking nut (Figure 1, Item 1).

6.

Remove four self-locking nuts (Figure 1, Item 2), cap screws (Figure 1, Item 5), and drawbar bracket assembly

(Figure 1, Item 14). Discard self-locking nuts (Figure 1, Item 2).

1

2

3

4

4

5

6

8

3

7

9

10

11

12

13

14

15

16

17

18

M116_M101_134

Figure 1.

Adjustable Front Support Leg Removal.

END OF TASK

TM 9-2330-202-13&P

0062

0062-2