TM-9-2330-202-13-P
TRAILER, CARGO, 3/4-TON, 2-WHEEL: M101A1, M101A2 AND M101A3; TRAILER, CHASSIS, 3/4-TON, 2-WHEEL: M116A1 AND M116A2; TRAILER, CHASSIS, 1-TON, 2-WHEEL: M116A3
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
DECEMBER 2011
TM-9-2330-202-13-P - Page 315 of 552
FIELD MAINTENANCE
SPRING ASSEMBLY MAINTENANCE
INITIAL SETUP:
Tools and Special Tools
Tool Kit, General Mechanic's
(WP
0115, Table 1, Item 1)
Materials/Parts
Three cotter pins (WP
0099, Figure 18, Item 1)
Three lubrication fittings
(WP
0099, Figure 18, Item 3)
Four self-locking nuts
(WP
0099, Figure 18, Item 9)
Degreasing solvent
Materials/Parts (cont.)
(WP
0114, Table 1, Item 9)
Rag, wiping
(WP
0114, Table 1, Item 24)
Personnel Required
Two
References
WP
0077
Equipment Condition
Wheel assembly removed (WP
0034)
WARNING
•
Spring weighs over 100 lb (45 kg). Use suitable lifting device. Failure to comply may result
in death or injury to personnel. Seek medical attention in the event of an injury.
•
Trailer must be supported by blocking or support stands placed under axle or frame
throughout maintenance procedure. Failure to comply may result in death or injury to
personnel. Seek medical attention in the event of an injury.
TM 9-2330-202-13&P
0065
0065-1
Back to Top
