TM-9-2330-227-14-P

SEMITRAILER, VAN: SHOP, 6-TON, SINGLE AXLE, M146

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

JUNE 1985

TM-9-2330-227-14-P - Page 316 of 576

5-42

TM 9-2330-227-14&P

BRAKESHOE ASSEMBLY REPAIR, ONE-CYLINDER BRAKE ASSEMBLY OPTION

This task covers:

Repair (page 5-42)

INITIAL SETUP

Tools

Brush, wire

Drift, brass, 3-inch

Gage, thickness, 0.002-inch (0.051-mm)

Press, arbor

Reliner, brake

Materials/Parts

Bushing, brakeshoe

Mask, protective

Rivets, (16 required)

Materials/Parts - Continued

Shim stock, as required

Solvent, drycleaning, PD-680

(item 18, appendix E)

Personnel Required

One

Equipment Condition

Brakeshoes removed (page 4-88).

ACTION

LOCATION

ITEM

REMARKS

REPAIR

WARNIN G

Drycleaning solvent PD-680 is both toxic and flammable. Avoid prolonged breathing of

vapors and avoid skin contact. Use only in well-ventilated area, and keep away from

open flame. Injury to personnel could occur.

Brake linings contain asbestos fibers. Protective mask must be worn while performing

maintenance on brake linings. Failure to do so could result in serious injury to

personnel.

Worn brake linings could result in injury or death to personnel. When brake linings are

worn to within 0.0625-inch (1.59 mm) of rivets, they must be replaced.

NOT E

There are four brakeshoes on semitrailer. This procedure is for one. Repeat for the

others.