TM-9-2330-335-14-P
SEMITRAILER, TACTICAL, BREAKBULK/CONTAINER TRANSPORTER, 22-1/2 TON, RESET M871R, M871A1R AND M871A2R
TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE MANUAL (INCLUDES REPAIR PARTS AND SPECIAL TOOLS LIST)
SEPTEMBER 2008
TM-9-2330-335-14-P - Page 106 of 640
TM 9-2330-335-14&P
0014-4
0014
9
Before
Lights
NOTE
• Check
for
loose
plug-in
connectors. Make sure there is no
debris between plug and connector
and then make sure that plug-in is
seated.
• Mission requirements, urgency,
safety, and common sense should
be considered in determining
NMC status of the semitrailer.
Connect intervehicular cable from tractor
to semitrailer. Check lights for damage,
proper operation, presence, and missing
hardware. Notify Organizational
Maintenance if there are problems in
operation or damage is present.
Lights are damaged, do not
operate, or missing hardware.
NMC if required for mission.
10
Before
Reflectors
Look for presence, damage, and missing
hardware.
Reflectors are missing and
required for mission.
11
Before
ABS Warning
Light
NOTE
• Tractor must be coupled before
checking ABS warning light.
• ABS warning light should not stay
on when semitrailer is moving
above 4 mph (6.4 kph).
• If mission requirements do not
allow for troubleshooting of ABS
system, continue on with mission
until system can be properly
diagnosed
by
Organizational
Maintenance. Only modulation
will be affected, not stopping
capacity of brake system.
Visually check that ABS warning light
does not stay on. Notify Organizational
Maintenance.
ABS light does not come on or
stays on.
Table 1. Operator Preventive Maintenance Checks and Services (PMCS) - Continued.
ITEM
NO.
INTERVAL
MAN-
HOURS
LOCATION
ITEM TO
CHECK/
SERVICE
PROCEDURE
NOT FULLY MISSION
CAPABLE IF:
Back to Top
