TM-9-2330-342-23-P

PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1

TECHNICAL MANUAL; FIELD MANUAL

OCTOBER 2012

TM-9-2330-342-23-P - Page 353 of 1348

FIELD MAINTENANCE

PARKING BRAKE(S) ON ONE AXLE DO NOT APPLY OR APPLY SLOWLY

INITIAL SETUP:

Tools and Special Tools

Tool Kit, General Mechanic's: Automotive

(WP

0194, Table 1, Item 47)

Materials/Parts

Pin, Cotter (WP

0195, Table 1, Item 75)

Pin, Cotter (WP

0195, Table 1, Item 16)

Personnel Required

Wheeled Vehicle Mechanic (2)

References

WP

0066

References (cont.)

WP

0067

WP

0071

WP

0072

WP

0078

WP

0092

Equipment Condition

Parking brake applied (TM 9-2330-342-10).

(WP

0190)

Wheels chocked (TM 9-2330-342-10). (WP

0190)

Emergency air supply gladhand connected to

vehicle (TM 9-2330-342-10). (WP

0190)

TROUBLESHOOTING PROCEDURE

PARKING BRAKE(S) ON ONE AXLE DO NOT APPLY OR APPLY SLOWLY

STEP 1

Are air lines and fittings free of crimps?

NOTE

•

Trailer air system pressure must be 125 ± 5 psi (861 ± 34 kPa) to begin

troubleshooting the brake system. If the air system pressure cannot be maintained,

refer to the Air System Troubleshooting.

•

Air lines and valves listed in this troubleshooting procedure are illustrated and located

in Air System Schematic.

1.

Inspect air lines listed in table and fittings for crimps.

Table

1.

Parking Brake Air Lines.

Axle No. 1

Axle No. 2

Axle No. 3

Air Hose No.

Air Hose No.

Air Hose No.

LH 2032

LH 2142

LH 2141

RH 2022

LH 2139

RH 2140

RH 2138

RH 2143

TM 9-2330-342-23&P

0035

0035-1