TM-9-2330-342-23-P

PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1

TECHNICAL MANUAL; FIELD MANUAL

OCTOBER 2012

TM-9-2330-342-23-P - Page 385 of 1348

QUICK RELEASE

VALVE

AIR

LINE

2660

TRANSDUCER

Figure 2.

Quick Release Valve and Air Line 2660.

6.

Connect TK test cable to MSD/ICE test equipment (WP

0004) and to the TK pressure transducer (blue stripe).

7.

Perform ICE Offset Test 50.

CONDITION/INDICATION

Does test equipment pass offset test?

DECISION

Yes - Go to (Step 3 - Is load sensing valve adjusted correctly and supplying 30 to 125 ± 5 psi (207-861 ± 34

kPa)?).

No - Test equipment failed offset. Contact your Supervisor.

STEP 3

Is load sensing valve adjusted correctly and supplying 30 to 125 ± 5 psi (207-861 ± 34 kPa)?

WARNING

If air lines are disconnected when they are under 125± 5 psi (862± 34 kPa) pressure, they

can whip around. Care should be exercised when disconnecting an air hose that is thought

to be under pressure. Be sure to wear proper eye protection. Failure to comply may result in

injury or death to personnel.

1.

Disconnect load sensing valve control rod from axle (WP

0080).

2.

Have assistant turn engine start switch to ON. Refer to vehicle Operator's manual (WP

0190).

TM 9-2330-342-23&P

0040

0040-3